In order for you to be pleased with the final result of the installation of floors from the laminate, you must use the desired tool. But we will talk about the tool for the installation of floors from the laminate and we will talk in this article. Shpagat is needed in order to beat off a direct horizontal, vertical or diagonal line of starting the installation of floors. In order to make the desired marks on the laminate panel, use a building pencil.
But the metal corner of the line has a size of 35 cm, use to apply a pencil with a flat line on the surface of the laminate panel. Flow (rotary, plastic) is used to cut the laminate panel at the right angle. You can also use an electric building jigsaw.
The wedges are used to mark the desired distance of the laminate panel from the wall surface. A wooden bar and a kiyanka with a rubber nozzle is used for tightly entering the panels into the grooves of the locks. Level is needed in order to withstand the straight plane of the surface of the floor covering.
The clamp must be used when the installation of the laminate is completed, so that the last panels are tightly entered in the groove of the previous panel. Well, why do you need a roulette, you are unnecessary to say, because you already know that without it it is impossible to make the correct marking on the laminate panel.