Before work from the ceiling, you need to remove the existing coating – whitewashing, paint or wallpaper. The paint is removed with a spatula, the lime is washed off with water, and the solution of washing powder will remove from the surface of the pollution. To save glue, the ceiling must be primed. This will not allow the glue to absorb to the excess depth, where a universal primer or special for adhesive materials is suitable. It must be applied with a roller, and hard -to -reach places can be treated with a roller. If necessary, the procedure can be repeated.
To determine the center, the threads stretch along the diagonal of the ceiling. Marking the intersection point, two lines must be drawn through it, perpendicular and parallel to the window to divide the ceiling into 4 equal rectangles. Playing should start in the middle in order to avoid a violation of the pattern in the center of the ceiling due to the occurrence of probable irregularities.
After applying the glue to the back of the tiles diagonally and the perimeter and attach it to the ceiling so that its angle coincides with the intersection of the marking lines. It is advisable to press a wooden bar. When gluing other elements, their sides should be parallel to the markup. A ceiling plinth is glued around the perimeter, and the seams are putty. If desired, the ceiling and skirting boards can be painted.