Very often, during the repair, it is necessary to put a putty of various surfaces, thanks to which they become perfectly smooth and even. Putty is very often a preliminary stage of work before staining. This contributes to the uniform application of the paint, and the service life of the finished surface is significantly increased.
To apply putty on the wall use a steel or wooden spatula. And in order to entrust the window platbands, the bindings are best used to use a piece of rubber of the desired size, the edges of which can be either even and curly.
In addition to a spatula, you need a container in which the putty mixture is laid out. On top, putty is covered with plastic film to prevent its drying. A little putty is typed on the spatula, which is spread to the wall surface and horizontal or vertical movements. Differently to those OR until the layer becomes sufficiently thin and even. If necessary, the putty mixture is applied to two or three layers, each previous layer should be thoroughly aligned, polished and dried.
Each layer can first be disgusted, this will make the next layer of putty thinner. If the putty is applied to the dried putty, then the work will be more difficult, since the previous layer will absorb the moisture of the new layer, making it more thick.
Putting their putty with grinding with sandpaper or pumsy, which is carried out by pumice ends.