When starting the repair in a house or apartment, many are faced with pouring the cement screed of the floor. The quality of the screed you poured directly affects the quality and appearance of your gender. Before starting to fill the floor, it must be brought into the proper form. It is necessary to remove the old flooring and carefully remove dirt and dust. If the previous screed has a very large number of defects, then it is best to remove it with a hammer with a chisel. Cement screed is usually made of cement mortar or on the basis of dry mixtures. Basically, a solution is used for screed.
Before the start of work, you should purchase and install beacons at a distance of 50-60cm along the length of your room. Then prepare the solution (the ratio of materials one to three), to give elasticity to the solution, you can add shampoo or PVA glue. Before the start of filling the floor solution, you need to moisten the floor well and stretch the net around the entire perimeter.
To obtain a very strong screed, the thickness of the solution should not exceed 5 cm. The solution should pour absolutely all the cracks. After the solution is filled, pull out all the beacons until the solution dries and fill the remaining voids with the solution.